1 files changed, 27 insertions, 2 deletions

diff --git a/sway/sway-output.5.scd b/sway/sway-output.5.scd
index 69f529fe..4159a851 100644
--- a/sway/sway-output.5.scd
+++ b/sway/sway-output.5.scd
@@ -40,6 +40,16 @@ must be separated by one space. For example:
 
                 output HDMI-A-1 mode 1920x1080@60Hz
 
+*output* <name> modeline <clock> <hdisplay> <hsync_start> <hsync_end> <htotal> <vdisplay> <vsync_start> <vsync_end> <vtotal> <hsync> <vsync>
+        Configures the specified output to use the given modeline. It can be
+        generated using *cvt*(1) and *gtf*(1) commands. See *xorg.conf*(5).
+        Only supported on DRM backend.
+
+        Example:
+
+                output HDMI-A-1 modeline 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
+
+
 *output* <name> position|pos <X> <Y>
         Places the specified output at the specific position in the global
         coordinate space. The cursor may only be moved between immediately
@@ -112,7 +122,7 @@ must be separated by one space. For example:
 *output* <name> toggle
         Toggle the specified output.
 
-*output* <name> dpms on|off
+*output* <name> dpms on|off|toggle
         Enables or disables the specified output via DPMS. To turn an output off
         (ie. blank the screen but keep workspaces as-is), one can set DPMS to off.
 
@@ -142,11 +152,26 @@ must be separated by one space. For example:
         Enables or disables adaptive synchronization (often referred to as Variable
         Refresh Rate, or by the vendor-specific names FreeSync/G-Sync).
 
-        Adaptive sync allows clients to submit frames a little to late without
+        Adaptive sync allows clients to submit frames a little too late without
         having to wait a whole refresh period to display it on screen. Enabling
         adaptive sync can improve latency, but can cause flickering on some
         hardware.
 
+*output* <name> render_bit_depth 8|10
+        Controls the color channel bit depth at which frames are rendered; the
+        default is currently 8 bits per channel.
+
+        Setting higher values will not have an effect if hardware and software lack
+        support for such bit depths. Successfully increasing the render bit depth
+        will not necessarily increase the bit depth of the frames sent to a display.
+        An increased render bit depth may provide smoother rendering of gradients,
+        and screenshots which can more precisely store the colors of programs
+        which display high bit depth colors.
+
+        Warnings: this can break screenshot/screencast programs which have not been
+        updated to work with different bit depths. This command is experimental,
+        and may be removed or changed in the future.
+
 # SEE ALSO
 
 *sway*(5) *sway-input*(5)